SETAL A U 601 HV TBA is in the formulation of fast-drying hard-wearing wood finishes and DIY and decorative sealers. General SETAL A U 601 HV TBA is an isocyanate-modified alkyd resin with a high crosslinking density. The paint films are characterised by their good performance properties such as hardness and flexibility. They are therefore highly resistant to wear and abrasion. They also have good resistance towater and household cleaning agents. The use of the following driers is recommended: 0.03 % cobalt 6, 0.60 % zirconium 18 and 0.10 % calcium 4. The metal content is always calculated on the solvent-free resin.Methylethyl ketoximen has proved ideal as an anti-skinning agent for these formulations. The amount required is 1.0 %, calculated on the solvent-free binder. Wood finishes: typical applications for SETAL A U 601 HV TBA include the formulation of coatings for indoor use, e.g. for doors and window frames and for parquet flooring. It can also be used in coatings for garden furniture, boats and other such substrates. Coatings based on SETAL A U 601 HV TBA can be matted easily with small amounts of matting agent. Combination of SETAL A U 601 HV TBA with SETAL A F 681 yields highbodied gloss coatings. The brushability, especially of DIY paints, can be optimised by the addition of small amounts of SETAL A U 601 TIX TBA (approx. 5 - 10%, calculated on SETAL A U 601 HV TBA). Coatings based on SETAL A U 601 HV TBA dry to formdefectfree films on most tropical woods so no special impregnation is necessary beforehand. However, given the many different types of tropical woods and their very different properties and constituents, trials should always be carried out. Important - Depending on their viscosity, coatings based on SETAL A U 601 HV TBA can be applied by brushing, rolling or spraying. Sprayingmust be carried out inwaterrinsed spray booths. Spray mists must be regularly removed to prevent ignition.

SETALUX 1189 SS-60 is in combination with aliphatic poly-isocyanates: good build and gloss, high end-hardness, good exterior durability. It is used as Industrial 2-component topcoats. Varnishes, clearcoats and solid colour systems for refinishing (cars, train and tram units) All systems can be used for drying at roomtemperature as well as drying at elevated temperatures.

SETALUX 1152 SS-60 is in combination with aliphatic poly-isocyanates: easy application, even under conditions of high humidity and low temperatures. High build and practically no yellowing under UV light, excellent exterior durability, good mechanical properties and chemical resistance. It is used as varnishes and clearcoats for drying at room temperature and also between 60 °C and 80 °C.

SETALUX 1187 XX-60 is in combination with aliphatic poly-isocyanates: excellent mechanical properties and chemical resistance, high-medium solids. In combination with Vestanat T 1890 S: high solid, high build, good gloss, excellent outdoor durability and light fastness, good mechanical properties. It is used as Industrial two-component coatings (in combination with poly-isocyanates such as Desmodur N) with excellent flexibility and mechanical properties. Mixing resin for two-component systems to optimize/improve the flexibility. Combination with Vestanat 1890 S.