BECKOPOX EH 623W/80WA is a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC). BECKOPOX EH 623W/80WA is used in combination with the water emulsifiable liquid resins Beckopox EP 122w, EP 147w and other liquid resins such as Beckopox EP 140, EP 116 and the solid resin dispersions Beckopox EP 384w and EP 385w (preferably in combination with liquid EP-resins) to produce water-thinnable paints hardening at room temperature with good adhesion to all mineral substrates.Drying at elevated temperatures (> 60 °C) should be avoided. At such conditions traces of acrylonitrile will be released. If the hardener is diluted with water there may be stability problems at solid concentrations of less than 20 %, especially at storage temperatures above 35 °C. When pigments and fillers are being dispersed in the hardener, the temperature must not be allowed to rise above 40 °C. These paints retain a constant gloss irrespective of thinning ratio or the time between mixing and the end of the pot life. Beckopox EH 623w may be used in combination with Beckopox EP 128 as an additive for hydraulic mortars, the mechanical properties of the cured system being considerably enhanced by the additive.

NPEF-170 is a BPF type epoxy resin, it provides low viscosity / high flow characteristics suited for use in non-solvent (100% solid) applications for coatings, molding etc. Flexibility and adhesive strength is also increased making NPEF-170 resin excellent for use in civil engineering, electrical insulation materials.

EPOXY NPEF 180 is a Bisphenol F epoxy resin blended with Bisphenol A epoxy resin. The low viscosity allows high filler loading and gives good wetting effect. NPEF-180 can be blended with common epoxy resins. Cured with polyamines or polyamides at ambient condition, it provides good levels of chemical resistance and physical properties.

EPOXY NPSN 301X75 is an epoxy resin diluted in Xylene.