All
29アイテムが見つかりました。
Thank you. Your request has been sent.
ADDITOL VXW 6206
ADDITOL VXW 6206 is the leadfree and bariumfree combination drier. ADDITOL VXW 6206 produces in waterborne alkyd resin paints a good set-drying combined with an even through-drying. ADDITOL VXW 6206 contains a balanced metal combination which is for an optimum oxidative drying necessary.ADDITOL VXW 6206 may be added as siccative to all waterborne oxidatively drying alkyd resin paints. Especially suitable for externally emulsified alkyd resin emulsions.
化学品ビジネスライン
ADDITOL VXW 4973
ADDITOL VXW 4973 is an easily emulsifiable defoamer with very good incorporating ability. It is suited for defoaming of coarse-disperse to fine-disperse (plastic) dispersions on the basis of PVAC, PVC, acrylates and their copolymerisates. Also low-viscous products may be defoamed with ADDITOL VXW 4973.
化学品ビジネスライン
ADDITOL VXW 4940N
ADDITOL VXW 4940N is the lead-free combination drier. ADDITOL VXW 4940N produces in water-dilutable alkyd resin paints a quick set-drying in connection with an even trough-drying. ADDITOL VXW 4940N contains all metals which are necessary for an utmost oxidative drying. Adding any other drier is not necessary. The lead-free combination drier ADDITOL VXW 4940N produces in water-dilutable alkyd resin paints a quick set-drying in connection with an even trough-drying. ADDITOL VXW 4940N contains all metals which are necessary for an utmost oxidative drying. Adding any other drier is not necessary. ADDITOL VXW 4940N can be used as drier for all water-dilutable, oxidatively drying alkyd resin paints. Especially recommendable is the usage of ADDITOL VXW 4940N for drying alkyd resin emulsions, e. g. Resydrol AY 586w, Resydrol AY 466w, Resydrol AZ 436w, because contrary to conventional driers
a homogeneous distribution is provided and therefore a quick drying and most of all good drying stability can be achieved. ADDITOL VXW 4940N can also be used for acryl-alkyd hybrid systems.
化学品ビジネスライン
ADDITOL VXW 6393
ADDITOL VXW 6393 was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. Prior to using ADDITOL VXW 6393 it should be thoroughly agitated since it is prone to sediment fall out. When examining its rheology it is necessary to wait an additional 5 minutes. ADDITOL VXW 6393 can be easily emulsified and worked into the designated
product.
化学品ビジネスライン
ご注文カートに追加されました。
店舗所在地別の商品の在庫状況
時間