SETATHANE D 1155 is applied in combination with e.g. SETATHANE D 1145 and 1150 in the formulation of coatings SETATHANE D 1155 is not recommended as a sole binder. Because of its low viscosity, SETATHANE D 1155 is especially suitable for combination with SETATHANE D 1145 and 1150 in the formulation of solventfree, self-leveling polyurethane coatings of low viscosity. Desmodur® VL or VL 50 are normally used as hardener.

SETATHANE D 1150 is applied in the formulation of tough-elastic coatings. It is used in combination with other polyols such as SETATHANE D 1145, 1155 and crosslinked with Desmodur® VL, SETATHANE D 1150 is suitable for use in the formulation of two-component coatings. These are mainly used on concrete and asphalt floors and steel surfaces. After crosslinking and curing of SETATHANE D 1150 with Desmodur VL, the resultant coatings are tough and flexible, hard-wearing and hemicalresistant. It can also be combinedwith Desmodur L to formulate highly resistant sealing compounds.

SETATHANE D E 2761 is applied in combination with Desmodur® VL as a binder for thermal-shock resistant cementitious 3K- PUR- screed. SETATHANE D E 2761 is suitable for the formulation of cementitious 3K- PURscreed for food and beverage industries. Mortars formulated with SETATHANE D E 2761 / Desmodur VL generally exhibit very good thermalshock resistance and resistance to organic and inorganic acids, alkalis and solvents. Over-crosslinking of 400 % and more is usual. To ensure blister-free curing, SETATHANE D E 2761 requires the addition of hydrated lime and cement as a CO2 scavenger.

SETATHANE D E 2656 is applied in combination with Desmodur® VL as a binder for chemically resistant coatings. SETATHANE D E 2656 is suitable for the formulation of coatings and mortars with high chemical resistance for food and beverage industries. Coatings formulated with SETATHANE D E 2656 / Desmodur VL generally exhibit very good resistance to organic and inorganic acids, alkalis and solvents. Overcrosslinking of 500 % is usual. This optimizes chemical resistance and flow. To ensure blister-free curing, SETATHANE D E 2656 requires the addition of hydrated lime and/or cement as a CO2 scavenger.