ADDITOL XL 109 prevents surface defects in oxidatively drying paints, like icing, wrinkling, shrinkage. Enhances through-drying, levelling and hardness. For paints on oil and alkyd resins. ADDITOL XL 109 is a specific antioxidizing agent for oxidizing paint systems and inhibits or retards the crosslinking reactions initiated by air oxygen in the surface of paint films. Thus ADDITOL XL 109 acts as antiskinning agent and impairs too quick drying of the surface. The paint films remain liquid for longer times and oxygen can contact the deeper layers of the films. Through drying is enhanced and becomes uniform over the whole layer of the film.Surface defects usually due to inuniform drying, like icing, wrinkling and shrinkage can be prevented. At the same time, gloss, levelling, and film hardness are enhanced.ADDITOL XL 109 remains active in the paint on prolonged storage in closed containers. Crystallization eventually occurring on storage at lower temperatures can be dissolved by gentle heating. We recommend to jointly use ADDITOL XL 109 and ADDITOL XL 297. Both additives are supplementary in effect giving superior performance in respect of antiskinning, drying and gloss.

ADDITOL XW 395 Enhances surface properties of the films and prevents film defects like insufficient wetting and structured surfaces owing to impurities. ADDITOL XW 395 is an additive specially designed for Resydrol paint systems and, compatibility provided, for other waterborne paint systems. Considering the levels and restrictions given below ADDITOL XW 395 can be used in any water dilutable paint with the exception of electrodeposition paints. ADDITOL XW 395 prevents film defects, such as craters and pin holes or can remedy poor wetting owing to impurities brought into the aqueous paint during preperation or processing. Insufficiently degreased metal is the main cause for such troubles. With ADDITOL XW 395 wetting problems are avoided. It should be noted that film defects arising from silicone oils in many cases cannot be prevented with ADDITOL XW 395. ADDITOL XW 395 prevents floating of pigments, striation, orange peel, etc. and improves the film surface in general. ADDITOL XW 395 at the recommended levels, does not impair the physical properties of the stoved film. In primers ADDITOL XW 395 may cause a certain degree of gloss. Additions of ADDITOL XW 395 may adversely influence the effect of antifoaming agents; on the other hand, it can remedy infavourable effects of the antifoams. In aqueous paints for spray application ADDITOL XW 395 can be used without precautions, while in dipping or flow coating paints ADDITOL XW 395 must be carefully balanced with the antifoams normally present.

ADDITOL XW 6555 meet legislation & regulation requirements and is a ready to use combination drier designed to have excellent compatibility and fast incorporation in all waterborne and solvent borne alkyd paints. The balanced non-hazardous metal combination results in very good through drying performances combined with good surface drying. ADDITOL XW 6555 can be used as drier for all water?dilutable, solvent borne and high solid oxidative drying alkyd resins. The innovative emulsification technology employed enables a labeling free use in high quality architectural and protective coating applications using alkyds.

ADDITOL XL 102 is used to improve the effectiveness of paint removers containing paraffine and wax. Post treatment with organic solvents is not necessary.