SERDAS DF 7015 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. Its chemical description is an ultrafine dispersion of wax in mineral oil.

ADDITOL XW 376 can be used in most waterborne emulsion paints and adhesives, and in synthetic resin-bound renderings. Good storage stability even at elevated temperatures. ADDITOL XW 376 is effective in large to fine particle size dispersions based on polyvinyl acetate, PVC, acrylates and their copolymers as well as alkyd resin emulsions. It is easily emulsified and also incorporated in low viscosity systems. ADDITOL XW 376 is equally useful in deaeration during pigment grinding and in the filling process. It is shear stable and alkali resistant up to pH = 13.

ADDITOL XW 395 Enhances surface properties of the films and prevents film defects like insufficient wetting and structured surfaces owing to impurities. ADDITOL XW 395 is an additive specially designed for Resydrol paint systems and, compatibility provided, for other waterborne paint systems. Considering the levels and restrictions given below ADDITOL XW 395 can be used in any water dilutable paint with the exception of electrodeposition paints. ADDITOL XW 395 prevents film defects, such as craters and pin holes or can remedy poor wetting owing to impurities brought into the aqueous paint during preperation or processing. Insufficiently degreased metal is the main cause for such troubles. With ADDITOL XW 395 wetting problems are avoided. It should be noted that film defects arising from silicone oils in many cases cannot be prevented with ADDITOL XW 395. ADDITOL XW 395 prevents floating of pigments, striation, orange peel, etc. and improves the film surface in general. ADDITOL XW 395 at the recommended levels, does not impair the physical properties of the stoved film. In primers ADDITOL XW 395 may cause a certain degree of gloss. Additions of ADDITOL XW 395 may adversely influence the effect of antifoaming agents; on the other hand, it can remedy infavourable effects of the antifoams. In aqueous paints for spray application ADDITOL XW 395 can be used without precautions, while in dipping or flow coating paints ADDITOL XW 395 must be carefully balanced with the antifoams normally present.

MODAFLOW AQ 3025 is an acrylic flow additive for aqueous coatings. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. Modaflow AQ 3025 is amine neutralized in water and contains no organic solvents or silicone. The low viscosity of Modaflow allows for easy incorporation into the coating formulation versus Modaflow AQ 3000.