ADDITOL VXW 6206 is the leadfree and bariumfree combination drier. ADDITOL VXW 6206 produces in waterborne alkyd resin paints a good set-drying combined with an even through-drying. ADDITOL VXW 6206 contains a balanced metal combination which is for an optimum oxidative drying necessary.ADDITOL VXW 6206 may be added as siccative to all waterborne oxidatively drying alkyd resin paints. Especially suitable for externally emulsified alkyd resin emulsions.

ADDITOL XW 6555 meet legislation & regulation requirements and is a ready to use combination drier designed to have excellent compatibility and fast incorporation in all waterborne and solvent borne alkyd paints. The balanced non-hazardous metal combination results in very good through drying performances combined with good surface drying. ADDITOL XW 6555 can be used as drier for all water?dilutable, solvent borne and high solid oxidative drying alkyd resins. The innovative emulsification technology employed enables a labeling free use in high quality architectural and protective coating applications using alkyds.

RESAMIN HF 480 has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability. Resamin HF 480 can also be used in stoving systems based on alkyd/amino resins or in coatings based on thermoplastic resins to improve flexibility and adhesion. In combination with thermoplastic resins like Hostaflex (PVC) or Butvar (poly vinyl butyral), pigmentation and gloss development are improved as well.

TUNGOPHEN B NV is applied as an additive in alkyd coatings. Additions of 1 - 3% TUNGOPHEN B NV, calculated on the 100% alkyd resin, greatly accelerate the through-drying and increase the gloss of alkyd coatings. Initial drying slows in proportion to the addition of TUNGOPHEN B NV. This improves the flow properties of the coating and reduces the likelihood of surface defects, even in thicker films. TUNGOPHEN B NV is usually added at room temperature as a solution in xylene. The addition of TUNGOPHEN B NV results in yellowing. For this reason, it should not be used in white coatings. The amount used in pale-colored coatings should be kept to a minimum. Addition of the product to coatings based on medium-oil alkyd resins, e.g. Setal A F 48, will result in particularly significant acceleration of through-drying. TUNGOPHEN B NV should not be used in styrenated alkyd resins, oil based coatings or oil/resin combination coatings.