DEUTERON WAX A is an additive for gloss reduction and gloss reduction mar resistance and slip in semigloss and flat coatings.

ADDITOL XL 109 prevents surface defects in oxidatively drying paints, like icing, wrinkling, shrinkage. Enhances through-drying, levelling and hardness. For paints on oil and alkyd resins. ADDITOL XL 109 is a specific antioxidizing agent for oxidizing paint systems and inhibits or retards the crosslinking reactions initiated by air oxygen in the surface of paint films. Thus ADDITOL XL 109 acts as antiskinning agent and impairs too quick drying of the surface. The paint films remain liquid for longer times and oxygen can contact the deeper layers of the films. Through drying is enhanced and becomes uniform over the whole layer of the film.Surface defects usually due to inuniform drying, like icing, wrinkling and shrinkage can be prevented. At the same time, gloss, levelling, and film hardness are enhanced.ADDITOL XL 109 remains active in the paint on prolonged storage in closed containers. Crystallization eventually occurring on storage at lower temperatures can be dissolved by gentle heating. We recommend to jointly use ADDITOL XL 109 and ADDITOL XL 297. Both additives are supplementary in effect giving superior performance in respect of antiskinning, drying and gloss.

ADDITOL VXW 4973 is an easily emulsifiable defoamer with very good incorporating ability. It is suited for defoaming of coarse-disperse to fine-disperse (plastic) dispersions on the basis of PVAC, PVC, acrylates and their copolymerisates. Also low-viscous products may be defoamed with ADDITOL VXW 4973.

High pigment loading without increase in viscosity. Reduction of dispersing time. Enhances gloss and levelling. For air drying and stoving solvent-borne paints and particularly for water dilutable paint systems. ADDITOL XL 203 prevents the floating of titanium dioxide in conjunction with organic or inorganic coloured pigments. It can be employed in solvent-borne and water dilutable air drying and stoving paint systems. ADDITOL XL 203 enhances gloss and levelling of paint films. Pigment loading of paints and pigment pastes can be increased without rises in viscosity. Dispersion time is reduced. The recommended level may range from 0.1 to 1.5 % on total paint. Level on pigments: inorganic pigments: 0.5 - 2.5 %, organic pigments: 1.5 - 5 %. The figures given here may serve as a guide for extensive trials to find the optimum in dosage and effect and to save costs. Since ADDITOL XL 203 is a cationic product it should not be used in conjunction with certain anionic products. Phase seperation occurs and ADDITOL XL 203 becomes ineffective at once. The compatibility should be determined by experiments. ADDITOL XL 203 can be combined with cationic and non-ionic products.