KRONOS 2310 is a treated rutile for coatings with excellent optica poperties and high outdoor resistance.

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.

ADDITOL VXW 4973 is an easily emulsifiable defoamer with very good incorporating ability. It is suited for defoaming of coarse-disperse to fine-disperse (plastic) dispersions on the basis of PVAC, PVC, acrylates and their copolymerisates. Also low-viscous products may be defoamed with ADDITOL VXW 4973.

High pigment loading without increase in viscosity. Reduction of dispersing time. Enhances gloss and levelling. For air drying and stoving solvent-borne paints and particularly for water dilutable paint systems. ADDITOL XL 203 prevents the floating of titanium dioxide in conjunction with organic or inorganic coloured pigments. It can be employed in solvent-borne and water dilutable air drying and stoving paint systems. ADDITOL XL 203 enhances gloss and levelling of paint films. Pigment loading of paints and pigment pastes can be increased without rises in viscosity. Dispersion time is reduced. The recommended level may range from 0.1 to 1.5 % on total paint. Level on pigments: inorganic pigments: 0.5 - 2.5 %, organic pigments: 1.5 - 5 %. The figures given here may serve as a guide for extensive trials to find the optimum in dosage and effect and to save costs. Since ADDITOL XL 203 is a cationic product it should not be used in conjunction with certain anionic products. Phase seperation occurs and ADDITOL XL 203 becomes ineffective at once. The compatibility should be determined by experiments. ADDITOL XL 203 can be combined with cationic and non-ionic products.