ADDITOL VXW 4926 is a rapid defoaming or air release.It allows high film thickness of stoving paints, without cissing. Also suited for combinations of dispersions with water dilutable synthetic resins.ADDITOL VXW 4926 is a surface active additive for water dilutable paints. Particularly with spray application cissing on curing of the paint is prevented or may appear only with higher film thickness. Since ADDITOL VXW 4926 is not dilutable with water, it should be incorporated with great care. The dosed range is between 2 % and 15 % for 100 % binder solids. The optimum quantity should be determined in individual tests.

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.

MODAFLOW 9200 is a new low‐viscosity flow modifier developed for high performance in solvent‐based automotive and industrial coatings, especially in clear top coat applications where it offers high gloss, low orange peel, and excellent DOI (Distinctivness of Image) in the coating film. Using of Modaflow 9200 can significantly improve the quality of the coatings as follows: improves flow and leveling, reduces pinholes, fisheyes, craters and orange peel, improves substrate wetting, improves or maintain high gloss, improves or maintain substrate and intercoat adhesion, facilitates pigment dispersion, quantity to be added: 0.1 ‐ 2.0 % on solid resin.

MODAFLOW Powder III resin modifier is an efficient flow aid for industrial powder coatings. Very fine, free flowing particles make MODAFLOW® Powder III easy to incorporate into epoxy, polyester, hybrid, urethane or acrylic powder formulations. Like other members of this family, MODAFLOW® Powder III offers users: Improved flow and leveling, Reduced pinholes, fisheyes, craters, and orange peel, Improved substrate wetting and Enhanced initial adhesion. MODAFLOW Powder III is composed of materials regulated by the U.S. Food and Drug Administration (FDA) for indirect food contact applications under several parts of Title 21, Code of Federal Regulations. Details on specific coverage are available upon request. MODAFLOW® Powder III contains no silicone. Optimum concentrations for a specific formulation should be determined by incremental addition. In general, MODAFLOW® Powder III use levels vary between 0.5 - 2.0 parts per hundred resin.