ADDITOL XL 203 is a high pigment loading without increase in viscosity. Reduction of dispersing time. For air drying and stoving solvent-borne paints and for water dilutable paint systems. ADDITOL XL 204 prevents the floating of titanium dioxide in conjunction with organic or inorganic coloured pigments. It can be employed in solvent-borne and water dilutable air drying and stoving paint systems. ADDITOL XL 204 affords higher pigment loading of the paint system and pigment pastes without causing the viscosity rise usual with such products and, at the same time, reduces dispersing time. The recommended level may range from 0.1 to 1.5 % on total paint. Level on pigments: inorganic pigments: 0.5 - 2.5 % organic pigments: 1.5 - 5.0 %, Levels of addition in water dilutable air drying and stoving system may range from 1 to 6 % on pigments. The figures given here may serve as a guide for extensive trials to find the optimum in dosage and effect to save costs.

ADDITOL XL 6568 is used for the formulation of stripping enamels, release agents and temporary corrosion protection. ADDITOL XL 6568 is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be pealed off later. ADDITOL XL 6568 can be used in solvent based as well as in aqueous systems. Suitable binders for solvent based systems are the Hostaflex grades CM 150 and CM 133 as well as the Mowital grades B30HH and B60H. To formulate aqueous systems, acrylic dispersions like Ucecryl B 3022 are recommended. While solvent based release coatings can easily be removed from metallic substrates aqueous systems based on styrene acrylate dispersions can also be removed from glass, pottery, wood and plastics. For formulating systems with high film strength aqueous systems are more suitable than solvent based systems.

Prevents the sedimentation of pigments in paints. Improves the pigment-wetting during dispersion. In many paint systems the floating of pigments in pigment-mixtures is prevented. The tendency to flow off is reduced and the covering of edges is improved. Suggested for all solvent based and solvent-free paint systems. ADDITOL XL 270 is usually compatible with solvent based and solvent-free binders. It prevents the sedimentation of pigments in paints. The rheological character of paints is improved. The tendency to flow on vertical surfaces is reduced. The edges of substrates are better covered in case of dipping application. The drying of oxidatively drying systems is not influenced by ADDITOL XL 270, if the appropriated dose is used. Also the efficiency of siccatives in paints, stored for a long time, is not reduced using ADDITOL XL 270. Considering anti-corrosive paints, there is no corrosion-resistance loss by using ADDITOL XL 270. It is recommended to be used for the activating of organophile bentonites and it improves the effect of pyrogene silica.

ADDITOL XW 6535 is a grinding medium, especially designed for low VOC decorative systems. The special composition allows high pigment loading and very good compatibility to common decorative water borne and solvent borne binder systems. For the production of universal pigment concentrates based on ADDITOL XW 6535 we recommend to use the following ADDITOL grades: ADDITOL VXW 6205 (dispersing agent for inorganic pigments) ADDITOL VXW 6387 (anti settling ADDITOL VXW 6372 (preserver) and ADDITOL VXW 6211 (defoamer).