Peintures et revêtements

Indulin 1468 is a mechanically stable latex polymer dispersion that is readily incorporated into cationic asphalt emulsions via addition to the soap solution (batch process) or by co-milling (continuous process). Indulin 1468 can also be used to provide improvements in conventional asphalt properties such as increased softening point and decreased penetration.

BECKOPOX EP 386W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics. BECKOPOX EP 386W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox EH 613w or VEH 2188w it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 80 % of the stoichiometric curing agent not contain functional groups capable of reacting with epoxy groups.

DAOTAN VTW 1686/40WA is used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e. g. base coats.

VIACRYL VSC 6273W/44WA is applied in combination with hexamethoxymethylmelamine (HMMM, e. g. Cymel 303 or Cymel 1130) stoving enamels with high gloss, good outdoor-durability and little yellowing are achieved. Stoving conditions are from 30 min/140 °C to 20 min/160 °C. For the lower temperature range of 120 - 140 °C Viacryl VSC 6276w/44WA is preferred in combination with reactive waterdilutable melamine resins, such as Cymel 325 or Cymel 327.