Peintures et revêtements

RESYDROL AX 237W/70BG is a sole binder for air-drying corrosion protection coatings. In combination with suitbale melamine resins also for stoving systems. With polymer emulsions for air-drying coatings for wood and plastic. Resydrol AX 237w/70BG has a high pigment loading capacity, rapid curing and very good corrosion protection properties. As sole binder it can be used for air-drying corrosion protection primers. In combination with acrylic emulsions it can be used for air-drying and forced cured coatings for metal, plastic and wood. Crosslinked with melamine resins it is used for durable stoving systems. As a typical epoxy ester Resydrol AX 237w/70BG is susceptible to chalking and tends to discolor. In contrast to conventional primers even moist metallic substrates or wet wood can be overpainted without reduction in adhesion or surface defects. The coating can be applied by brushing, spraying or dipping. Forced drying is possible.

RESYDROL VAF 6111W/60WA comes without any organic solvents or amines. Stabilisation is reached by a special alkylphenolethoxylate-free carrier resin

RESYDROL AY 6705W/44WA is an acrylic modified alkyd emulsion which can be used alone or in combination with other w/b resins for decorative paints, exterior wood stains and industrial finishes.

RESYDROL VAL 5547W has excellent penetration properties and can be diluted with water without prior addition of neutralising agents. We recommend the addition of Resydrol VAL 5547w into water, in order to avoid the reaching of a viscosity maximum by diluting the other way round. In quick drying painting materials based on, for example Resydrol VAY 6278w, addition of Resydrol VAL 5547w will result in an optimization of brushability and wet edge time. However, the compatibility has to be carefully checked in every individual case and the added amounts should not exceed 15 %. Resydrol VAL 5547w (calculated on solid resin). Additions of Resydrol VAL 5547w may increase the yellowing. As sole binder Resydrol VAL 5547w can be used in wood impregnations. The incorporation of biocides like ADDITOL VXW 6370 is possible. Furthermore Resydrol VAL 5547w can be used as dispersing agent for waterborne systems, as resin for pigment pastes for waterborne and solventborne systems and as carrier for biocides for the wood protection. Since Resydrol VAL 5547w is oxidatively drying the active components will be fixated in the wood cells, so there is no danger of washing out of the active ingredients as it may happen for example in emulsifier containing systems. Resydrol VAL 5547w shows very good pigment wetting properties and is uneffected under shear. Water emulsifiable driers such as ADDITOL VXW 4940, ADDITOL VXW 4952 or VXW 6206 can be used with Resydrol VAL 5547w.