Peintures et revêtements

NPEK-114L is a C12-C14 aliphatic glycidyl ether diluted liquid resin, which has low viscosity to processing easily. It is excellent than conventionally diluted epoxy resins as better filler acceptance, reduced odor, lower vapor pressure and less potential for handing hazards. Cured NPEL-114L provides good levels of chemical resistance and physical properties, such as aliphatic polyamines and polyamides, usually their curing temperature are at room temperature.

YDF-170 is a liquid type Epoxy Resin derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-170 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents . Due to its special properties, YDF-170 is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. YDF-170 is a standard BPF type liquid resin.

NPEF-170 is a BPF type epoxy resin, it provides low viscosity / high flow characteristics suited for use in non-solvent (100% solid) applications for coatings, molding etc. Flexibility and adhesive strength is also increased making NPEF-170 resin excellent for use in civil engineering, electrical insulation materials.

EPOXY NPEF 180 is a Bisphenol F epoxy resin blended with Bisphenol A epoxy resin. The low viscosity allows high filler loading and gives good wetting effect. NPEF-180 can be blended with common epoxy resins. Cured with polyamines or polyamides at ambient condition, it provides good levels of chemical resistance and physical properties.